-Public Commands-
.server -> displays the pugserver.
.ip<number> -> used to find out the ut server ip.
.ts<number> -> used to find out the ts server ip.
.vent<number> -> used to find out the vent server ip.
.puginfo -> used to display the current pug information.
.rules -> displays the rules for the pug channel.
.active -> view status of pug chans with at least 1 person pugging.
.site -> displays channel .site link
.utv -> displays channel .utv link
.maps -> displays channel .maps link
.sc -> displays channel .sc link
.count -> displays how many people and ops are in the channel
.stats -> displays the utstats link.
.forum -> displays the link to the channel forums.
.ircstat -> displays the link to the channel stats website.
.match -> view if any match information is set for the channel.
.member -> used to view clan/channel members.
.theme -> displays the current theme
.ping -> used to see how you ping to the bot.
(only works if CTCPs are enabled)
.access -> see if you have admin access to Abot in the chan
.access <nick> -> check if the person specified is an admin of the bot.
.admin -> used to view ALL admins of the current channel.
.channeladmin -> used to view all channel admins of the bot in the current channel.
.semiadmin -> used to view all semi-admins of the bot in the current channel.
.superadmin -> used to view all superadmins of the bot.
.globaladmin -> used to view all globaladmins of the bot.
ADMIN Commands:
.setpug <on/off> -> use to turn off all pug commands in the channel.
.setmulti <on/off> -> set to on for 4-team pugs.
.setjoin <on/off> -> use to enable/disable the .join command.
.setletter <on/off> -> use to enable/disable letter joining.
.setvpug <on/off> -> use to enable/disable voice & op only pug.
.setrpug <on/off> -> use to enable/disable registered users only pug.
.setgametype <text> -> use to set the gametype for the pug.
.setendmsg <text> -> sets the message sent when the pug gets finished.
.setautopm <on/off> -> use to enable/disable auto-pm everyone when pug fills.
.setmode <on|off> -> If on, when the pug is filled, and captains are
picked, it will voice captains and moderate the chan.
.setautoban <on|off
.setautopick <on/off> -> If on, ABot auto-picks captains & teams.
.setrule<number> -> use to set rules for the pug channel.
.delrule<number> -> use to delete the specified rule#.
.setquery <on/off> -> use to enable/disable querying UT
.setqmsg <on/off> -> When enabled, all queries go to private messages.
When disabled, all queries go to the channel.
.settsquery <on/off> -> use to enable/disable querying TS and Vent servers
.setweather <on/off> -> use to enable/disable weather query
.setletter <letter> -> sets the given pug letter, ONLY IF it is not
currently in use. (YES I know there is a .setletter <on/off>
.forceletter <letter> -> overrides pug letter, even if it's already taken.
.newletter -> use to generate a new pug letter
.setlimit <number> -> use to set number of people in pug.
.setip<number> <ip> -> use to set the ip for ut server.
.setts<number> <ip> -> use to set the ip for ts server.
.setvent<number> <ip> -> use to set the ip for vent server.
.setstats <website> -> use to set the utstats website for your server
.reset -> reset pug with the CURRENT letter.
.fullreset -> reset pug with NEW letter.
.promote -> Notices everyone in the channel to join the pug.
.spam <ip> -> use to spam the ip for the utserver in the channel.
.randcapt -> force random captains when a pug gets filled.
.addplayer <nick> -> use to add a player to the pug.
.delplayer <nick> -> use to remove a player from the pug.
.rename <pugnick> <newpugnick> -> use to rename a player in a pug to another nick.
Mainly for when people ping out and come back while
their other nick is still in the chan.
.mergestats <nick1> <nick2> -> use to merge pug stats from nick2 to nick1.
This will delete pug stats for nick2
General Admin Commands:
.addsuperadmin <nick> -> adds an admin to the super admin list. (can only be
done by globaladmins)
.delsuperadmin <nick> -> use to delete a superadmin. (can only be done by
globaladmins)
.addcadmin <nick> -> adds an admin to the channel admin list. (can only be
done by superadmins and above)
.delcadmin <nick> -> use to delete a channel admin. (can only be done by
super admins and above)
.addadmin <nick> -> use to add a semi-admin to the current channel. (can
only be done by superadmins and above)
.deladmin <nick> -> use to delete an admin. (can only be done by
channel admins and above)
.addpadmin <nick> -> adds an admin to the channel peon-admin list. (can only
be done by semi-admins and above)
.delpadmin <nick> -> use to delete a channel peon-admin. (can only be done by
super admins and above)
.addchan <#chan> -> adds a channel to the autojoin list (can only be
done by superadmins)
.delchan <#chan> -> use to remove a channel from the autojoin list (can
only be done by superadmins)
-The following commands can be used by semi-admins and above:
.addut <alias> <IP:port> -> use to add a UT99 alias for the given server
ip:port (for querying only, NOT FOR PUG .IP COMMANDS)
.addut2 <alias> <IP:port> -> use to add a UT2k4 alias for the given server
ip:port (for querying only, NOT FOR PUG .IP COMMANDS)
.addut3 <alias> <IP:port:qport> -> use to add a UT3 alias for the given server
ip:port (for querying only, NOT FOR PUG .IP COMMANDS)
.addts <alias> <IP:port> -> use to add a TS alias for the given server
ip:port (for querying only, NOT FOR PUG .TS COMMANDS)
.addvent <alias> <IP:port> -> use to add a Ventrillo alias for the given server
ip:port (for querying only, NOT FOR PUG .VENT COMMANDS)
.addet <alias> <IP:port> -> use to add a Enemy Territory alias for the given
server ip:port (for querying only)
.delut <alias> -> removes the given UT alias from UT alias list
.delut2 <alias> -> removes the given UT2k* alias from UT alias list
.delut3 <alias> -> removes the given UT3 alias from UT alias list
.delts <alias> -> removes the given TS alias from TS alias list
.delvent <alias> -> removes the given VENT alias from VENT alias list
.delet <alias> -> removes the given ET alias from ET alias list
.setcolor<scheme> <color> -> use to set the specified color number to the
specified color.
Color scheme is the following:
-> qc1 => main color
-> qc2 => secondary color & comma color in query
-> qc3 => Fragcount color
-> qc4 => Red team color
-> qc5 => Blue team color
-> qc6 => Green team color
-> qc7 => Gold team color
-> qbeg => Beginning text & color
-> qend => End text & color
-> qsep => Seperator text & color
-> qlbrac => Left bracket text & color
-> qrbrac => Right bracket text & color
.themes -> displays all available themes
.settheme <theme> -> use to change the current theme
.savetheme <theme> -> use to save the current color scheme in the channel
.setmatch -> use to set the .match message
.setforum -> use to set the forum website for your clan/channel
.setircstats -> use to set the utstats website for your server
.addmember <name> -> use to add a member in the member list
.delmember <name> -> use to delete a member in the member list
/-UT, Teamspeak & Ventrilo Query Usage-/
To begin querying teamspeak server, connect to your favorite
IRC server and message yourself in the following format:
UT99:
!ut <ip:port>
or
q <ip:port>
UT2k*:
!ut2 <ip:port>
UT3*:
.ut3 ip -p port
.findut3 port <ip>
!ts <ip:port>
!vent <ip:port>
!liststaff (lists the NeedClan staff)
!lclans (lists all clans in the database)
!addclan !addplayer (to add a clan or player to the database)
!delclan !delplayer (to remove a clan or player from thedatabase)
!fclan !fplayer (finds a clan or player in the database)
!fclangt !fplayergt (finds a clan or player in the database by
gametype)
!fclanc !fplayerc (finds a clan or player in the database by
country code)
!vclan !vplayer (views a clan's or player's details)
Previous Topic
Index